性能特点 PERFORMANCE CHARACTERISTICS
・冲压速度:SPM100次/分钟以内
・产品通用性强,螺杆部分可在同行程下通用,
只需更换攻牙头组件
・适应螺丝规格:M1-M10
・适应正攻、倒攻螺丝孔成型
・一台机可以有多种螺丝规格
・一台机可以有多孔(最多12个孔)
・攻牙头快速插入式安装
・丝锥快速自锁式安装
・传动螺杆使用寿命达5000万冲次以上
・若有特殊要求可订制
01
・Stamping speed: spm100 times / min
・The product has strong versatility, the screw part can be used in the
same process, only need to replace the tapping head assembly
・Applicable screw specification: m1-m10
・ It is suitable for the forming of positive tapping and reverse tapping screw holes
・A machine can have multiple screw specifications
・One machine can have multiple holes (up to 12 holes)
・Quick insertion installation of tapping head
・Tap quick self-locking installation
・The service life of transmission screw is more than 50 million strokes ・Customized if there are special requirements
应用范围 SCOPE OF APPLICATION02 |
|
|
冲压加工成型,包含汽车五金零件,电子五金零件, | Stamping processing molding, including automotive hardware parts, |
|
家具五金零件,家具五金配件,玩具五金零件,手机 | electronic hardware parts, furniture hardware parts, furniture hardware |
|
accessories, toy hardware parts, mobile phone hardware parts, building |
|
五金零件,建筑五金零件等冲压产品需要攻牙的都有 |
|
hardware parts and other stamping products that need tapping are |
|
|
|
广泛的应用 | widely used |
|
机型参数 MODEL PARAMETERS | 03 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
机型分类 | 攻牙数量 | 攻牙范围 | 行程范围 | 攻牙方向 | 攻牙深度 | 最小牙孔中心距 | 其他特点 |
|
Number of | Minimum center |
|
Type Classification | Tapping range | Travel range | Direction of tapping | Tapping depth | Other features |
|
tapping teeth | to center distance |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
双驱动分体式攻牙机 | 1-12孔 | M1-M10 | 40-400mm | 正攻牙及倒攻牙 | 0.2-15mm | 20 | 大螺纹专用 |
|
Double drive split | Normal tapping and | Special for large |
|
1-12 hole |
|
tapping machine |
|
| reverse tapping |
|
| thread |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|